Nozzle Features
- Internal mix
- Flow rates from 32 L/hr to 840 L/hr
- Very fine atomisation
We supply nozzles in the petroleum, petrochemical and gas processing industries. BETE range of nozzles and their materials can be selected to match applications including crude oil, abrasive media, corrosive reagents and extreme temperatures.
Common nozzle applications in the petroleum and petrochemical industries:
- FCC (Fluid Catalytic Cracking) Feed Nozzle
- Torch oil sprays
- Distillation nozzles
- Chemical injection nozzles
- Waste disposal
- CCR lift lines/refinery piping
- Scrubbing
- Gas cooling/quenching
- Special hazard Deluge
- Tank cleaning
With a total in house design, construct and supply fabrication team, both the nozzle selection to complete spray lance and spraying spray bar systems, as well as stuffing box, valving and retractable lances can be supplied as a complete package. Welding, QA and full NDT and reporting are available.
-
-
Nozzle Features
- Internal mix
- Flow rates from 15.5 L/hr to 840 L/hr
- Very fine atomisation
-
Kicking off Stang’s large-sized cannon product line, the 910 Remote Control Low-Profile Monitor can flow up to 15,000 GPM. The 910 has many configurations available, including dual outlets. If you need to move 7,500 to 15,000 GPM of water, the 910 is for you.
-
Stang’s smallest remote cannon, the 915 Remote Control Super-Low-Profile Monitor is durable enough for the most grueling of applications. Combining the world class, hand-made construction and performance of all Stang guns in a small form factor.
-
Stang’s smallest snorkel monitor, the 915 Snorkel Monitor differs from its station monitor cousin by being able to shoot a jet stream almost straight down. The 915 combines the world class, hand-made construction and performance of all Stang guns.
-
This the smallest water cannon available from Stang. the 915 Station Monitor is durable enough for the most grueling applications. The 915 Station combines the world class, hand-made construction and performance of all Stang guns in a small form factor.
-
Stang’s 916 Remote Control Super-Low-Profile Monitor is the largest production water cannon in the world. This giant was engineered to launch 21,000 GPM exceeding 600-feet!
-
Our most popular Snorkel monitor, the 925 Snorkel Monitor it can discharge a jet of water straight down. Used primarily in industrial cleaning applications, its capable of shooting 1000 gallons per minute, which makes quick work of loose sediment, caked on dirt and impacted sludge.
-
Stang’s best selling monitor, the 925 Station Monitor hits that sweet spot between capability and cost. Able to throw a stream of water over 200-feet, the 925 will securely manage up to 1000 GPM. The 925 combines the world class, hand-made construction and performance of all Stang guns.
-
A top seller, the 925 Remote Control Super-Low-Profile Monitor is durable enough for the most grueling of applications. Combining the world class, hand-made construction, and performance of all Stang guns, it will deliver up to 1,000 GPM over 200-feet.
-
A popular apparatus monitor, the 930 Station Monitor sits comfortably between the 925’s affordability and the 940’s greater flow rate output. The 930 can shoot 1250 GPM more than 250-feet all on a perfectly balanced frame.
-
A popular apparatus and refinery monitor, the 930 Remote Control Super-Low-Profile Monitor is engineered to manage up to 1,250 GPM with a shoot of over 250-feet. Perfectly balanced and durable enough for the most grueling of applications. This monitor combines the world class, hand-made construction, and performance of all Stang guns.
-
The smallest entry in our range of mid-sized cannons, the 940 Station Monitor can flow up to 3,500 gallons per minute at 150 psi. The 940 enjoys the balance and ease of movement as its smaller cousins and is built for years of constant use.
-
The smallest entry in our range of mid-sized cannons, the 940 Station Monitor can flow up to 3,500 gallons per minute at 150 psi. The 940 enjoys the balance and ease of movement as its smaller cousins and is built for years of constant use.
-
The first entry in our range of mid-sized remote control cannons, the 940 Remote Control Super-Low-Profile Monitor can flow up to 3,500 GPM. The 940 enjoys the balance and ease of movement as its smaller cousins and is built for years of constant use.
-
Stang’s largest manually operated cannon, the 960 Station Monitor can flow 7,500 gallons per minute at 150 psi. The 960 enjoys the balance and ease of movement as its smaller cousins and is built for years of constant use.
-
Stang’s most popular mid-sized cannon, the 960 Remote Control Super-Low-Profile Monitor can flow up to 7,500 GPM. In addition to its top-selling status, this unit has the most number of configurations available of any Stang monitor, which means that we have a perfect configuration for your application.
-
The largest of Stang’s mid-sized cannon product line, the 980 Remote Control Super-Low-Profile Monitor can flow up to 11,000 GPM. The 980 has many configurations available, including dual outlets. If you need to move 5,500 to 11,000 GPM of water, the 980 is your answer.
-
Components
Reducing couplings, socket adapters, elbows and various other fittings are available to meet specific applications.Materials
Materials available.Sizes
Sizes available as required. -
Custom design, manufacturing and in-house service / repair of lance pipework and spray bars
Spray Nozzle Engineering manufacture injection quills, also known as spray quench, spray bars or injection lances. We design and supply custom made spray bars based on the type of fluid and its velocity. During the design process we also consider factors such as the gas pressure, inlet temperature, target temperature, inlet humidity and gas flow. We work in conjunction with a team of engineers that design solutions based on water conditions, pressure, temperature and cleanliness. The lances are used in gas scrubbing, refineries, chemical plants, among a long list of industries. Spray Nozzle Engineering works to your requirements, from the most simple to the most complex. -
Nozzle Features
- The effective wherever rectangular pattern is required
- Flow rates from 1.77 L/Min to 649 L/Min
- Excellent clog resistance
- Mounted in opposing pairs
- Good distribution with pressures as low as 0.5 psi (0.03 bar)
-
Nozzle Features
- A series of small spiral nozzles with orifice diameters of 0.04″ (1.02 mm) to 0.12″ (3.05 mm)
- Flow rates from 0.53 L/Min to 14.7 L/Min
-
Nozzle Features
- Low profile nozzle provides effective cleaning with low water consumption
- Flow rates from 0.16 L/Min to 155 L/Min
- Interchangeable family of shower nozzles
- Self-aligning
- Orifice designed for efficient cleaning
-
Nozzle Features
- Ultimate clog-resistant design with largest free passage available in a full cone nozzle
- Flow rates from 2.60 L/Min to 3540 L/Min
- Maximum free passage of particles
- Easily handles dirty, lumpy liquids
- Flanged connection available
- High reliability spray performance under difficult conditions
-
Nozzle Features
- Rugged pinless design
- Flow rates from 0.032 L/Min to 1.41 L/Min
- Drip-free performance
- Mist at low pressure; fog at high pressure
-
Nozzle Features
- Ultimate clog-resistant design with largest free passage available in a full cone nozzle
- Flow rates from 0.44 L/Min to 7.94 L/Min
- Maximum free passage of particles
- Easily handles dirty, lumpy liquids
- High-reliability spray performance under the most difficult conditions
- Uniform spray distribution
-
Nozzle Features
- High flow rates with coarse atomisation
- Flow rates from 7.50 L/Min to 8180 L/Min
- Reliable, uniform coverage
- Lightweight and rugged
- Flanged connections available for larger models
-
Nozzle Features
- Narrow spray angles
- Flow rates from 23.1 L/Min to 4660 L/Min
- High velocity
- The spray is coarse and extremely hard-driving
-
Nozzle Features
- Takes no more room than a pipe plug
- Flow rates from 7.50 L/Min to 1596 L/Min
- Small projection
-
Components
Optional strainer to fit BJ and CW nozzles. All Strainers are equipped with 316 stainless steel screens of various mesh sizeMaterials
316 stainless steelSizes
US Mesh sizes:50 297 μm S201 100 149 μm S202 200 74 μm S203 400 37 μm S204 -
Nozzle Features
- No internal parts
- Flow rates from 0.043 L/Min to 5.34 L/Min
- Highly efficient laminar jet impinges on target pin generating fine fog
- Finest fog of any direct pressure nozzle
-
Components
BETE Nozzles are often installed in pipe sizes larger than their connection. These bushings will adapt BETE nozzles to existing pipng.Materials
316 stainless steel nickel alloy C-276 nickel alloy 625 PVC PTFESizes
1/4 x 1/8 3/8 x 1/8, 1/4 1/2 x 1/8,1/4, 3/8 1 x 1/4, 3/8, 1/2, 3/4 1-1/2 x 1/4, 1/2, 1 2 x 1/2, 1 -
Nozzle Features
- Inherently clog-resistant with no internal parts
- Flow rates from 2.26 L/Min to 10700 L/Min
- Cobalt alloy 6 or RBSC ceramic parts in high-wear areas
- Flanged and special connections available as required
- Fine atomisation
-
Nozzle Features
- Ultra-wide spray coverage very close to the nozzle
- Flow rates from 12.3 L/Min to 355 L/Min
- One-piece design/no internal parts
- Excellent choice for deluge applications
- Fine atomisation
-
Nozzle Features
- The original spiral nozzle invented by BETE
- Flow rates from 2.26 L/Min to 10700 L/Min
- No internal or moving parts
- Clog-resistant
- High discharge velocity
- The TF24-150, the TF8NN, and TF8FCN (in brass) are FM approved
- Fine atomisation
-
Nozzle Features
- Largest free passage
- Flow rates from 9.67 L/Min to 10700 L/Min
- Clog-resistant
- One-piece, extra heavy construction
- Fine atomization
-
Nozzle Features
- Large free passage
- Flow rates from 15.3 L/Min to 2230 L/Min
- Clog-resistant
- One-piece casting
- Inlet and outlet are in-line
- Most even spray distribution of any tangential whirl nozzle in the industry
-
Nozzle Features
- Advanced whirl plate design produces uniform coverage
- Flow rates from 0.497 L/Min to 192 L/Min
- Medium to coarse atomisation
-
Nozzle Features
- Right angle nozzle
- Flow rates from 0.12 L/Min to 145 L/Min
- Durable
- Oversized body for extended life
- Large free passage
-
Nozzle Features
- No internal parts, clog-resistant
- Uniform distribution
- Large free passage
-
Nozzle Features
- Internal mix
- Flow rates from 1.7 L/hr to 93 L/hr
- Very fine atomisation
-
Nozzle Features
- External mix: allows spraying of viscous materials
- Flow rates from 2.7 L/hr to 234 L/hr
- Able to spray high viscosity (100+ cP) fluids which require a round spray pattern
- Variable atomisation
-
Nozzle Features
- Internal mix
- Flow rates from 1.4 L/hr to 250L/hr
- Very fine atomisation
-
Components
BETE recommends the use of strainers to minimise clogging. The 1/4" and 3/8" strainers are equipped with 0.25mm0mesh screens, while 1/2" - 2" strainers come with 0.20mm-mesh screens. Screens with mesh sizes of 0.05, 0.06, 0.13 and 0.15mm are available by special order. Screens are easily removed for cleaning. 10 var rating.Materials
Bronze body with heavy-duty stainless steel wire mesh.Sizes
Strainer size:1//4, 3/8, 1/2, 3/4, 1, 1-1/2, 2 Mesh Sizes. Screen Opening 0.25mm 0.13mm 0.20mm 0.18mm 0.13mm 0.28mm 0.06mm 0.71mm 0.05mm 0.86mm
