window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments);} gtag('js', new Date());gtag('config', 'UA-39940769-1');

Chemical injection

/Chemical injection
  • XAPR Nozzles

    Design Features of the XAPR Air Atomising, Pressure Fed, and Narrow Angle Injector Nozzle
    • Internal mix
    • Very fine atomisation
    • Narrow spray angle (12° to 22°)
    • Full cone pattern
    • Large forward projection - up to 28 feet (8.5 m)
    Common Materials:
    303, 303 / 304, 316, Nickel-plated Brass, Nickel-plated Brass / 304
  • PJ Nozzles

    Design Features

    • High energy efficiency
    • No whirl vanes or internal parts
    • 1/8" or 1/4" male connection
    • 100-mesh screen, 20 micron paper filter or 70 micron polypropylene filter optional

    Spray Characteristics

    • Finest fog of any direct pressure nozzle
    • Produces high percentage of droplets under 50 microns
    Common Materials:
    303, 310, 316, 321, 347, Brass, Nickel Alloy C-276
  • L Nozzles

    • A series of small spiral nozzles with orifice diameters of 0.04" (1.02 mm) to 0.12" (3.05 mm)
    • Male connection
    • Spray Pattern of the L Evaporative
    • Cooling Nozzle: Hollow Cone Fog, nearly as fine as  P series
    Common Materials:
    303, 310, 316, 317L, 321, 347, Brass, Nickel Alloy C-22, Nickel Alloy C-276, PTFE
  • TF Nozzles: Spiral spray, fogging, misting, and evaporative cooling nozzles in a wide range of flows and angles; full cone nozzles, hollow cone nozzles, misting nozzles

    TF Spiral Spray Nozzle Details

    • The original spiral nozzle invented by BETE
    • Also referred to as pigtail nozzles, corkscrew nozzles and/or helix nozzles
    • High energy efficiency
    • One-piece/no internal parts
    • Clog-resistant performance
    • High discharge velocity
    • Male connection standard; female connection available by special order
    • The TF24-150, the TF8NN, and TF8FCN (in brass) are FM approved
    • Wide range of flow rates and spray angles
    • Fine atomisation
  • MaxiPass low flow (MPL) nozzles: Low flow maximum free passage full cone nozzles

    • Ultimate clog-resistant design with largest free passage available in a full cone nozzle
    • Two unique S-shaped internal vanes, as opposed to x-vane style nozzles, allow maximum free passage of particles
    • High energy efficiency
    • Easily handles dirty, lumpy liquids
    • Male connections
    • High reliability spray performance under the most difficult conditions
  • MicroWhirl® (MW) Nozzles atomising, evaporative cooling, misting, and fogging nozzles

    • Outstanding atomization
    • Rugged pinless design
    • Drip-free performance
    • 70 micron polypropylene filter
    • Safety wire hole available
    • U.S. Patent #7198201
    • Minimum operating pressure 100 psi (7 bar)
    • Mist at low pressure; fog at high pressure
    Common Materials:
    303, 316, Nickel Alloy C-276
  • NCS nozzles

    • Takes no more room than pipe plug, yet performs like full-size nozzle
    • Small projection
    • Can be used with standard pipe couplings to form female nozzle, with elbows to form right angle nozzle, or with tees or crosses for multiple installations
    • Male connection
    • Metal and plastic materials
    Common Materials:
    316, A494 CU5MCuC (cast Nickel Alloy 825), A494 CW2M (cast Nickel Alloy C-276), A494 CW6MC (cast Nickel Alloy 625), A494 CX2MW (cast Nickel Alloy C-22), Brass, Duplex 2205, Polypropylene, PTFE, PVC
  • WL Whirl nozzles

    • Advanced whirl plate design produces uniform coverage
    • Male and female connections
    • Medium to coarse atomisation
    Common Materials:
    303, 316, Brass, CPVC, Duplex 2205, Nickel Alloy 625, Nickel Alloy 825, Nickel Alloy C-22, Nickel Alloy C-276, Polypropylene, PTFE, PVC, PVDF
  • WTX nozzles

    • Tangential whirl
    • Oversized body for extended life
    • Male and female connections
    • Large free passage
    Common Materials:
    303, 316, Brass, Duplex 2205, Nickel Alloy 625, Nickel Alloy 825, Nickel Alloy C-22, Nickel Alloy C-276
  • WTZ nozzles

    • No internal parts, clog-resistant
    • Uniform distribution
    • Male and female connections
    • Large free passage
    Common Materials:
    303, 316, Brass, Duplex 2205, Nickel Alloy 625, Nickel Alloy 825, Nickel Alloy C-22, Nickel Alloy C-276, PVC